Latest model

Member of the European association of Ships in bottles. https://www.shipinbottlemakers.com/
Latest model.
Building a pinball machine and making all the parts with what comes to hand in my garage drawers.

Select a model

SELECT a MODEL below and SCROLL DOWN to view it's diary . Click on any picture in the diary and a slideshow will open up.
BEST VIEWED on a COMPUTER SCREEN.

STAGECOACH - 1848

This is a model of an Artesania Latina kit of an 1848 Stage coach. Although an excellent kit, it has many construction faults. The backrest is 10mm too long and the stanchions for the roof rack are incorrect. They have only 1 railing hole instead of 2, therefore you need to be very good at soldering in order to fit the bottom rails.
Also, a lot of the wood measurements in the instructions are incorrect and you have to measure on the model to ensure correct sizes. The instructions appear to relate to an earlier version of the kit. For example, the foam inserts for the cushions are supplied twice as thick as stated in the instructions and you only use 1 layer instead of 2. Sometimes, after fitting parts according to the photos, you find later that they are in the way of future parts and modifications are needed.

the wheel hubs are not drilled perfectly centre so need to be filled in with dowel and re-drilled using  a home made alignment jig. You also need to make a jig for assembling the wheel rim segments in order to get them perfectly round, and then getting the spokes perfectly symmetrical.

Although the kit is rated for 14 years old and upwards, this is definitely not a beginners kit. The minimum tools required are a Dremel tool or similar, a wood steamer, various sizes of clamps, a selection of different adhesives and you need to be very proficient in soldering in order to make the railings for the roof rack.

Another thing is that you need to purchase separately, packs of 1.5mm and 2mm brass rod. The brass "rod" supplied is in coiled wire form and the 1.5 and 2mm thick wire is impossible to get sufficiently straight enough for railings for the roof rack.

It also helps to make a "dummy" roof template in order to assemble the railings.

Draw the roof outline on paper and then cut it to size. Decide where the stanchion holes will be in conjunction with the roof planking and mark on the paper template. Transfer this template outline onto the "dummy" roof template made from scrap wood (I used an old plywood fret that was just the right size) and drill the stanchion holes. This template is then cut to size and used to transfer the stanchion holes to the real roof. The railings are now built on the wooden template, soldered together and brush painted or sprayed. When dry and cured, they can be removed and glued to the roof.












13 comments:

  1. This comment has been removed by a blog administrator.

    ReplyDelete
  2. This comment has been removed by a blog administrator.

    ReplyDelete
  3. Hi
    Did you build this I just got the kit I was wondering if you used a sealer on the stage coach before you put varnish on it or did you use Polly and where did you find the paint for the wheels thanks for your time and have a great day
    Rich

    ReplyDelete
    Replies
    1. I only use sanding sealer, never varnish. I think the paint is Humbrol 74, maybe with a few drops of red added. It is the paint that I used on the funnels of my Titanic.

      Delete
  4. Hi here is my email bowlturner58@gmail.com

    ReplyDelete
    Replies
    1. I just put two post up my first one was under Anonymous right above Rich Bowlturner
      Thanks again for your time

      Rich

      Delete
  5. My son has this kit and my wife threw out the instructions. Do you know how we can get a new copy?

    ReplyDelete
    Replies
    1. Hi
      You can get one from this email artesanialatina@artesanialatina.net good luck

      Delete
    2. https://www.artesanialatina.net/en/heritage-collection/3469-stage-coach-1848-wooden-model-heritage-collection.html

      Delete
  6. hi mike where can i buy the kid ?

    ReplyDelete
  7. sorry i mend kit.stage coach?

    ReplyDelete
  8. My kit came with a sheet of brass with precut parts but no description of what they are. I figured out a couple, but not all and would sure like a description of them like was supplied for the wood parts. Also, none of the brass coils seem to measure any of their descriptions. Thanks for any input, and regards, rdc

    ReplyDelete
  9. Hi Mike. This is my first really good go at this. What paints do you recommend for this Stage Coach

    ReplyDelete